SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 211 of 671
11-68.3. AMMO BOX TRAY (40 MM AND CALIBER .50) REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove locknut (7), washer (2), reinforcement bracket (8), capscrew (3), and washer (2) from
ammo box tray (1) and cargo floor (9). Discard locknut (7).
2.
Remove three locknuts (6), washers (5), capscrews (4), washers (5), and ammo box tray (1)
from cargo floor (9). Discard locknuts (6).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (appendix B, item 1)
Materials/Parts
Four locknuts (Appendix G, Item 77)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-387-10).
b. Installation
1.
Install ammo box tray (1) on cargo floor (9) with washer (2), capscrew (3), reinforcement bracket (8),
washer (2), and locknut (7).
2.
Secure ammo box tray (1) to cargo floor (9) with three washers (5), capscrews (4), washers (5), and
locknuts (6). Tighten capscrews (4) and (3) to 6 lb-ft (8 N
•
m).
NOTE
Longer capscrews go in right side mounting holes.
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-387-10).
SMI 9-2320-387-14&P-1
Change 4
11-128.15
Back to Top
