SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 338 of 671

12-123. TROOP/CARGO WINTERIZATION END CLOSURE REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove seven screws (1) and clamping strip (9) from top cover assembly (5), channel (10), and right

end closure (6).

2.

Remove three screws (2) and clamping strip (3) from top cover assembly (5), outside corner

plate (4), and right end closure (6).

3.

Remove eight screws (8) and clamping strip (7) from top cover assembly (5), and right end closure (6).

4.

Remove screw (14) from clamping strip (15), top cover assembly (5) and right end closure (6).

5.

Remove eight nuts (11), capscrews (13), clamping strip (15), and top cover assembly (5) from right

rear vehicle body (12).

SMI 9-2320-387-14&P-1

12-190

Change 4

Manual References

TM 9-2320-387-24P

Equipment Condition

• Rear reflector removed (para. 12-131).

• Rear composite light housing removed para. 12-132).

• Handle assembly removed (right end closure

only) (para. 12-128).

• Antenna mounting bracket removed (right end

closure only) (para. 12-130).

• Fuel can mounting bracket removed (left end

closure only) (para. 12-129).

• Blackout/dome light wiring harness removed

(para. 12-110).

NOTE

Replacement instructions for left and right end closures are

basically the same. This procedure covers right end closure.

INITIAL SETUP:

Applicable Models

M1152

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Twelve locknuts (Appendix G, Item 133.12)

Personnel Required

One mechanic

One assistant