SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 396 of 671
1.
Install support ring (2) on vehicle.
2.
Install support ring (2) on C-pillar support bracket (25) with plate (1), shim(s) (26) if removed,
snubber (22), mount (23), bushing (24), mount (23), snubber (22), washer (21), and capscrew (20).
Finger tighten capscrew (20).
3.
Install two front supports (3) on front mounting clevises (6) with two washers (4), capscrews (5),
washers (4), and locknuts (7).
4.
Install roof (para. 25-3.1).
5.
Tighten two locknuts (7) to 26 lb-ft (35 N
•
m).
6.
Install two connecting blocks (18) to B-pillars (13) with four washers (12), capscrews (11),
washers (12), and locknuts (14). Tighten locknuts (14) to 21 lb-ft (29 N
•
m).
7.
Tighten four screws (17) securing B-pillar covers (19) to 15 lb-ft (20 N
•
m).
8.
Install two striker plates (9) and two strap brackets (16) to B-pillars (13) with four capscrews (10)
and locknuts (15). Tighten locknuts (15) to 21 lb-ft (29 N
•
m).
9.
Install four edge trim strips (8) on B-pillar covers (19).
d. Installation
25-4.1. SUPPORT RING MAINTENANCE (
Cont’d
)
SMI 9-2320-387-14&P-1
25-6.6
Change 4
Back to Top
