SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 398 of 671

1.

Remove six capscrews (13) from two rear windshield mounting brackets (12) and windshield (3).

Remove shims (14) from behind mounting brackets (12), if present.

2.

Remove two locknuts (7), washers (6), capscrews (4), washers (6), and ring front supports (5) from

windshield clevises (8). Discard locknuts (7).

3.

Remove two locknuts (11), studs (10), washers (9), snubber plates (1), mounts (15), bushings (16),

mounts (15), snubber plates (1), and front roof mount plates (2) from windshield support

mounts (17). Discard locknuts (11).

a. Removal

25-6.1. WINDSHIELD MAINTENANCE (M1151)

This task covers:

a. Removal

c. Assembly

b. Disassembly

d. Installation

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic's tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 106)

Assembled locknut (Appendix G, Item 194)

Six lockwashers (Appendix G, Item 190.3)

Twenty-seven blind rivets

(Appendix G, Item 271.3)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-387-24P

Equipment Condition

• Wiper arms removed (para. 10-62).

• Left defroster nozzle removed

(para. 10-83).

• Right defroster nozzle removed

(para. 10-84).

Maintenance Level

Direct support

SMI 9-2320-387-14&P-1

25-14.2

Change 4