SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 406 of 671
25-6.1. WINDSHIELD MAINTENANCE (M1151) (
Cont’d
)
7.
Install three hinge pins (2) in lower hinges (3) with three hitch pins (1).
8.
Install two B-pillar covers (7) on roof (4) with four washers (6) and screws (5). Tighten screws (5) to
15 lb-ft (20 N
•
m).
9.
Install two bushings (22) four mounts (21) and snubber plates (12) on windshield support
mounts (23) and roof mounting plates (11) with two washers (15), studs (16), and locknuts (17).
Tighten locknuts (17) to 37 lb-ft (50 N
•
m).
10.
Tighten two locknuts (13) to 26 lb-ft (35 N
•
m).
11.
Place shims (20) between rear windshield mounting brackets (18) and windshield (14) as required
to fill gap.
12.
Install two rear windshield mounting brackets (18) on windshield (14) with six capscrews (19).
Tighten capscrews (19) to 15 lb-ft (20 N
•
m).
SMI 9-2320-387-14&P-1
25-14.10
Change 4
5
6
1
2
3
4
7
Back to Top
