SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 397 of 671

10.

Tighten six locknuts (34) on support ring (2) and upper supports (33) to 37 lb-ft (50 N

•

m).

11.

Tighten capscrew (20) on support ring (2) and C-pillar support bracket (25) to 37 lb-ft (50 N

•

m).

NOTE

It may be necessary to drill new holes into upper supports to allow

spring pins to be inserted.

12.

Insert four spring pins (37) through spring pin holes (38) in two connecting blocks (18). Drive ends

of spring pins (37) into upper supports (33). Ensure ends of spring pins (37) are even with surface

of connecting blocks (18).

13.

Insert two spring pins (36) through spring pin holes (35) in support ring (2). Drive spring pins (36)

into upper supports (33). Ensure ends of spring pins (36) are even with surface of support ring (2).

25-4.1. SUPPORT RING MAINTENANCE (

Cont’d

)

FOLLOW-ON TASKS: • Install turret bearing (para. 11-55.4).

• Install roof (para. 25-3.1).

SMI 9-2320-387-14&P-1

Change 4

25-7