TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 141 of 460

TB 9-2320-279-13&P-2

0025 00-1

REAR CAB (RIGHT) ARMOR REPLACEMENT

0025 00

THIS WORK PACKAGE COVERS

Removal, Cleaning and Inspection, Installation

INITIAL SETUP

Maintenance Level

Unit

Tools and Special Tools

Tool Kit, General Mechanic’s (Item 13, WP 0034

00)

Shop Equipment, Common No. 1 (Item 10, WP

0034 00)

Dispenser, Sealant (Item 2, WP 0034 00)

Link, Lifting (Item 8, WP 0034 00)

Sling (Item 11, WP 0034 00)

Lifting Device, 500-lb capacity

Materials/Parts

Adhesive, Thread (Item 1, WP 0035 00)

Rag, Wiping (Item 7, WP 0035 00)

Sealant, Urethane (Item 8, WP 0035 00)

Materials/Parts - Continued

Locknut (15)

Lockwasher (6)

References

WP 0011 00

Personnel Required

Two

Equipment Conditions

Vehicle parked on level ground (TM 9-2320-279-

10)

Parking/Emergency Brake applied (TM 9-2320-

279-10)

Engine off (TM 9-2320-279-10)

If equipped, Battery Disconnect Switch in OFF

position (TM 9-2320-279-10)

Spare Tire removed (TM 9-2320-279-10)

REMOVAL

1.

Remove four bolts (8), nuts (6), and lockwashers (7) from tire carrier (1) and fender (5). Discard lockwashers.

2.

Remove two bolts (2), nuts (3), and lockwashers (4) from tire carrier (1). Discard lockwashers.

417-033

1

2

3

4

5

6

7

8