TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 179 of 460

TB 9-2320-279-13&P-2

SIDE ARMOR REPLACEMENT - MODEL B - CONTINUED

0031 01

0031 01-9/(0031 01-10 Blank)

Change 1

INSTALLATION - CONTINUED

9.

Install reflector (7) and two bolts (6) on side of vehicle.

10.

Feed side marker harness (5) through side armor and connect to vehicle harness (4).

11.

Connect ground wire (9) and install screw (8) on back of side marker (2).

12.

Install side marker (2) and four screws (10) on side armor.

13.

Install side marker cover (3) and two screws (1) on side marker (2).

14.

Remove sling and lifting device from lifting eyes.

15.

Verify correct operation of door assembly (WP 0004 00).

16.

Install exterior mirror on door assembly (TM 9-2320-279-20).

END OF WORK PACKAGE

440-058