TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 169 of 460

TB 9-2320-279-13&P-2

FRONT SIDE ARMOR ASSEMBLY REPLACEMENT - CONTINUED

0031 00

0031 00-5/(0031 00-6 Blank)

INSTALLATION - CONTINUED

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury to personnel.

NOTE

Side armor assembly weighs 49 lb (22 kg).

2.

With assistance, position side armor assembly (5) and install four washers (2) and bolts (1) on side of cab.

3.

Connect side marker electrical connector (4) to cab wire harness.

4.

Install nine bolts (3) on side armor assembly (5).

5.

Install door assembly (WP 0015 00).

6.

Operate door and side marker to verify correct operation.

END OF WORK PACKAGE