TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 166 of 460

TB 9-2320-279-13&P-2

FRONT SIDE ARMOR ASSEMBLY REPLACEMENT - CONTINUED

0031 00

0031 00-2

REMOVAL

1.

Remove nine bolts (3) from hinge bracket (13).

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury to personnel.

NOTE

Side armor assembly weighs 49 lb (22 kg).

2.

With assistance, remove four bolts (1), washers (2), and side armor assembly (5).

3.

Disconnect side marker electrical connector (4) from behind side armor panel (5).