TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 162 of 460

TB 9-2320-279-13&P-2

REAR SIDE ARMOR REPLACEMENT - CONTINUED

0030 00

0030 00-2

REMOVAL

1.

Remove two locknuts (6), washers (7), and attachment plates (1 and 8). Discard locknuts.

2.

Remove two bolts (15), washers (16), and handle (19) from vehicle.

NOTE

Seat belt brackets in this procedure apply only to vehicles with a 3-point seat belt system.

3.

Remove locknuts (4 and 9), washers (5 and 10), seat belt brackets (3 and 11), and attachment plates (2 and 12). Discard

locknuts.

4.

Remove two bolts (17), washers (18), and cab side (rear) armor (13 and 14).

417-035

1

2

3

4

6,7

8

9

11

12

13

14

15

17

19

15

17

5

10

16

18

16

18