TB-9-2320-279-13-P-2

TECHNICAL BULLETIN; CREW PROTECTION KIT

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)

SEPTEMBER 2005

TB-9-2320-279-13-P-2 - Page 167 of 460

TB 9-2320-279-13&P-2

FRONT SIDE ARMOR ASSEMBLY REPLACEMENT - CONTINUED

0031 00

0031 00-3

DISASSEMBLY

1.

Remove two screws (6), washers (7), nuts (11), washers (12), and reflector (8) from side armor (5).

2.

Remove two screws (10) and side marker cover (9) from side armor (5).

3.

Remove four bolts (14), locknuts (15), and side marker (20) from side armor (5). Discard locknuts.

4.

Remove 10 bolts (16), washers (17), and locknuts (18) from side armor (5). Discard locknuts.

5.

Remove bracket (13) and hinge (19) from side armor (5).

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

ASSEMBLY

1.

Install bracket (13) and hinge (19) on side armor (5).

2.

Install 10 bolts (16), washers (17) and new locknuts (18) on side armor (5).

3.

Install side marker (20), four bolts, (14) and new locknuts (15).

4.

Install side marker cover (9) and two screws (10) on side marker (20).

5.

Install reflector (8), two washers (12), nuts (11), washers (7) and screws (6).