TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 389 of 396
TB 9-2320-279-13&P
0040
0040-139/ (140 blank)
14. Locate four wire connector on new harness.
15. Route four wire connector through pump module along the pipe that is farthest toward the driver’s side of
vehicle.
Secure it adjacent to the single brown wire with cable ties, approximately even with the end of the
pipe, as shown.
Connect four wire connector to matching connector end on existing chassis harness.
16. Secure all loose cables to existing hardware with cable ties.
Back to Top
