TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007
TB-9-2320-279-13-P-3

  TB-9-2320-279-13-P-3 - Page 381 of 396

TB 9-2320-279-13&P
0040
0040-131
15. On replacement harness, locate four wire connector (wires are black, white with brown tape, red and
blue, and white with green tape) as shown. Cut black wire and white with brown tape wire as
illustrated.
Discard four wire connector and remaining short end of replacement harness.
16. Install spade terminals on black wire and white with brown tape wire.
17. Install compression nut and plastic washer on replacement harness.
18. Route black wire and white with brown tape wire through compression fitting base and install
compression nut on compression fitting base.


Back to Top