TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007

TB-9-2320-279-13-P-3 - Page 378 of 396

TB 9-2320-279-13&P

0040

0040-128

4.

Drill the center hole to 45/64” and tap 0.5” NPT.

5.

Apply pipe thread sealing compound to the threads of the small compression fitting base.

6.

Install small compression fitting base in center hole of compartment light base.

7.

Repeat steps 3-6 for passenger side compartment light base.

8.

Install compression nut, plastic washer, and rubber gasket on black wire and white wire at end of

replacement harness off of T junction.