TB 9-2320-279-13&P
0040
0040-127
INSTALL NEW HARNESS- Model A (older vehicles)
Material:
Adhesive-sealant, silicone, RTV General purpose, Silastic 132 RTV NSN
8040-00-995-05901.
Apply pipe thread sealing compound to threads of large compression fitting base.
2.
Install large compression fitting base on control junction box.
3.
Test-fit smaller compression fitting in forward center hole of driver side compartment light base.
If the
compression fitting can be installed, proceed to step 5.
Bulb shown removed for clarity.