TB-9-2320-279-13-P-3

TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT

OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)

JANUARY 2007
TB-9-2320-279-13-P-3

  TB-9-2320-279-13-P-3 - Page 385 of 396

TB 9-2320-279-13&P
0040
0040-135
3.
Install red and blue wire on terminal block, matched to existing red and blue wire.
Install white wire with green
tape on terminal block, matched to existing green wire.
Other wires shown removed for clarity.
4.
Coat gasket with silicon adhesive-sealant.
5.
Install gasket and cover on control junction box with six screws.
6.
Install compression nut, plastic washer, and rubber gasket on black wire and white wire at end of replacement
harness off of T junction.


Back to Top