TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 374 of 396
TB 9-2320-279-13&P
0040
0040-124
Harness Removal – Model B (A2 vehicles)
1.
Battery disconnect switch to OFF position.
2.
Remove 6 screws, cover, and gasket from control junction box.
3.
Loosen two screws, white wire with green tape from side conduit, and red and blue wire from side
conduit, from lower half of terminal board. Shown with other wires removed for clarity.
4.
Loosen compression nut.
Remove cable, wires, rubber seal, plastic washer, and compression nut from
control junction box.
Back to Top
