5-114
TB 9-2320-280-35-12
Change 1
Section L.
ANTENNA CABLE INSTALLATION
NOTE
Perform following steps for vehicles with bolt-on armor installed.
50-1.
Route antenna cable (1) through hole (5) and connect antenna cable (1) to antenna (2).
50-2.
Remove self-tapping screw (4) from right capping ring (3).
50-3.
Secure antenna cable (1) to right capping ring (3) with clamp (6) and existing self-tapping screw (4).
3
4
2
6
5
1
Figure 5-154.
1. ANTENNA CABLE – A32551281W23 – QTY. 1
6. CLAMP – MS21333-96 – QTY. 1