TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 59 of 162
TB 9-2320-280-35-12
5-31
Figure 5-41.
Figure 5-42.
Figure 5-43.
Figure 5-44.
Section XVII.
PRINTER INSTALLATION
17-1.
Remove and discard three existing screws (2), washers (4), lockwashers (3), and nuts (5) from
multi-net rack (1).
17-2.
Secure bottom mounting bracket (7) to printer mount assembly (6) with six existing screws (9) and
washers (8).
17-3.
Install printer mount assembly (6) and mounting brackets (10) and (14) on multi-net rack (1) with
three screws (12) and lockwashers (11), and screw (13) and lockwasher (11).
17-4.
Secure printer mount assembly (6) to mounting brackets (10) and (14) with eight screws (17),
lockwashers (16), and washers (15).
~
~
~
1
2
3
4
5
6
7
8
9
6. PRINTER MOUNT ASSEMBLY – A3265640 – QTY. 1
7. BOTTOM MOUNTING BRACKET – P/O A3265640 – QTY. 1
8. WASHER – P/O 3265640 – QTY. 6
9. SCREW – P/O 3265640 – QTY. 6
10. MOUNTING BRACKET – P/O A3265640 – QTY. 1
11. LOCKWASHER – MS45904-68 – QTY. 4
12. SCREW – MS90728-8 – QTY. 3
13. SCREW – MS90728-6 – QTY. 1
14. MOUNTING BRACKET – P/O A3265640 – QTY. 1
15. WASHER – MS27183-8 – QTY. 8
16. LOCKWASHER – MS35338-43 – QTY. 4
17. SCREW – MS35207-263 – QTY. 8
6
1
14
10
12
11
11
13
~
~
~
6
14
10
15
15
16
16
17
17
~
2
Back to Top
