TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 63 of 162
TB 9-2320-280-35-12
5-35
Figure 5-49.
Section XX.
INVERTER INSTALLATION
20-1.
Locate, mark, and drill one 0.147-in. diameter hole (2) in multi-net rack (1).
20-2.
Install inverter (5) on mounting plate (7) with eight screws (4), eight lockwashers (3), right-side
inverter box plate (6), and left-side inverter box plate (9). Do not tighten screws at this time.
20-3.
Install inverter box front plate (8) by inserting inverter box side plate (6) and (9) hinge pins into
slots in inverter box front plate (8) and tightening all screws.
1
4
4
9
6
3
3
2
Figure 5-50.
~
~
~
7
~
8
~
5
~
3. LOCKWASHER – MS45904-68 – QTY. 8
4. SCREW – MS90725-8 – QTY. 8
5. INVERTER – 806-1050 – QTY. 1
6. INVERTER HOUSING SUPPORT (RH) – A3265690 – QTY. 1
8. FRONT COVER PLATE – A3265693 – QTY. 1
9. INVERTER HOUSING SUPPORT (LH) – P/O A3265690 – QTY. 1
Back to Top
