TB-9-2320-280-35-13
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-13 - Page 26 of 148
NOTE
• Do not install cab enclosure panel.
• Use figures 5-2 and 5-3 to identify cab enclosure panel that is
being modified.
3-3.
Locate, mark, and drill three 0.156-in. diameter holes marked A in cab enclosure panel (3) as shown
in figures 5-2 or 5-3.
3-4.
Locate, mark, and drill two 0.156-in. diameter holes marked C in cab enclosure panel (3) as shown
in figures 5-2 or 5-3.
5-2
TB 9-2320-280-35-13
Figure 5-2.
16.50
3.00
3.00
9.875
3.17
1.33
11.725
2.25
3.00
3.00
B
B
A
A
A
C
C
3
Back to Top
