TB-9-2320-280-35-13
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-13 - Page 28 of 148
5-4
TB 9-2320-280-35-13
CAUTION
Do not cut raised sections of terminal board. Terminal board is not
usable if cut on raised section.
3-6.
Measure and cut terminal board (5) in two places (6). Remove burrs and sharp edges.
3-7.
Install five nut sleeves (9) in terminal board covers (7), (8), and (10), and secure with five
snaprings (11).
Figure 5-4.
Figure 5-5.
6.624
24V REF
3.624
5
6
7
8
9
11
10
12V REF
5. TERMINAL BOARD – MS27212-3-8 – QTY. 1
7. TERMINAL BOARD COVER – 12480569-1 – QTY. 1
8. TERMINAL BOARD COVER – 12480569-2 – QTY. 1
10. TERMINAL BOARD COVER – MS18029-3S-2 – QTY. 1
Back to Top
