TB-9-2320-280-35-13
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-13 - Page 35 of 148
5-11
6-16.
Secure three 24V fusewire assemblies (24) and one 12V fusewire assembly (3) to B-beam (21) with
four self-tapping screws (35).
NOTE
For models equipped with power stud, perform step 6-17.
Otherwise, proceed to step 6-18.
6-17.
Secure 24V terminal board power wire terminal lug (27) to power stud (39) with lockwasher (37)
and existing nut (38).
6-18.
Secure 24V terminal board power wire terminal lug (27) to terminal board (36) with lockwasher (37)
and existing nut (38).
6-19.
Install decal (34) on B-beam (21).
6-20.
If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-280-20.)
6-21.
Install batteries. (Refer to TM 9-2320-280-20.)
Figure 5-15.
34
21
35
27
36
37
38
3
27
39
37
38
34. DECAL – 12339060 – QTY. 1
35. SELF-TAPPING SCREW – 12342499-2 – QTY. 4
37. LOCKWASHER – MS35338-48 – QTY. 1
TB 9-2320-280-35-13
24
~
Back to Top
