TB-9-2320-280-35-13

TECHNICAL BULLETIN

INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F

OCTOBER 2006
CHANGE 1

  TB-9-2320-280-35-13 - Page 32 of 148

5-8
TB 9-2320-280-35-13
6-5.
Connect wire (8) to existing positive 12V battery terminal end (10) with existing screw (9) and
nut (11).
6-6.
Position cab enclosure panel (12) in rear floor pan (20) and rear of B-beam (21). Do not secure cab
enclosure panel (12) at this time.
6-7.
Route ground cable (16) through battery box hole (6).
6-8.
Secure terminal lug (14) on center terminal of terminal board (13) with nut (15), and secure
terminal lug (19) on shunt (18) with existing screw (17).
6-9.
Install four additional nuts (15) on terminal board (13).
Figure 5-11.
Figure 5-12.
12
9
10
11
8
13
16
14
17
6
18
19
21
20
15
~
~
15. PLAIN-ASSEMBLED NUT – 271169 – QTY. 5
16. GROUND CABLE ASSEMBLY – 12480567-1 – QTY. 1


Back to Top