5-39
TB 9-2320-280-35-13
Figure 5-55.
1
2
7
6
3
1
6
4
8
9
1. LOUDSPEAKER CABLE – A3014038-3 – QTY. 1
6. ANTENNA CABLE – A3014031-8 – QTY. 1
12. LOOP CLAMP – MS21333-121 – QTY. 1
~
~
~
~
9
14
13
1
3
10
11
12
NOTE
SINCGARS model AN/VRC-92F shown.
15-2.
Route loudspeaker cable (1) down through center access hole (2), under integrated rack (3), and
under left-side tunnel insulation (9) towards left speaker (8). Connect loudspeaker cable (1) to left
speaker (8).
15-3.
Secure loudspeaker cable (1) to integrated rack (3) with loop clamp (12) and existing screw (14),
washer (13), lockwasher (11), and nut (10). Do not tighten nut at this time. Coil excess loudspeaker
cable (1) and store under integrated rack (3).
15-4.
Route antenna cable (6) from left side of mounting base (7), down through center access hole (2),
under integrated rack (3), and under right-side tunnel insulation (4) to B-beam.
~
Change 1