TB-9-2320-280-35-13
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-13 - Page 73 of 148
5-45
TB 9-2320-280-35-13
Section XVII. PLGR ANTENNA AND CABLE INSTALLATION (WITHOUT BOLT-ON ARMOR)
17-1.
Remove two plugs (1) from outer right-side windshield frame (3).
NOTE
Drilled holes on inside and outside of windshield frame should
align to allow routing of PLGR cable through windshield frame.
17-2.
Locate, mark, and drill one 0.375-in. diameter hole (2) in outer right-side windshield
frame (3).
17-3.
Locate, mark, and drill one 0.375-in. diameter hole (4) in inner right-side windshield frame (5).
Figure 5-61.
Figure 5-62.
~
4
5
1.25
5.12
2
3
1
~
0.75
3.00
Change 1
Back to Top
