TB-9-2320-280-35-13
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-13 - Page 84 of 148
5-56
TB 9-2320-280-35-13
20-7.
Remove and discard four existing bolts from left and right B-pillars.
20-8.
Remove paint from vicinity of four holes (11) on left B-pillar mounting (12). Apply anti-seize
compound as required.
20-9.
Install left overhead rail (7) on left B-pillar mounting (12) with four capscrews (13) and
washers (14). Do not tighten capscrews (13).
13. CAPSCREW – B1821BH025C138N – QTY. 8
14. WASHER – 2436161 – QTY. 8
Figure 5-76.
Figure 5-75.
7
12
14
13
8
16
15
14
13
20-10.
Remove paint from vicinity of four holes (16) on right side of vehicle B-pillar (15). Apply anti-seize
compound as required.
20-11.
Install right overhead rail (8) on right B-pillar mounting (15) with four capscrews (13) and
washers (14). Do not tighten capscrews (13).
11
Back to Top
