TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 112 of 380

TB 9-2320-302-13&P-1

LEFT SIDE ARMOR REPLACEMENT - CONTINUED

0021 00

0021 00-4

REMOVAL - CONTINUED

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

•

Left side armor weighs 70 lb (32 kg)

estimated.

•

Left A-pillar armor weighs 40 lb (18

kg) estimated.

7.

With assistance, remove seat belt bolt (24), bushing

(26), bushing (25), and left side armor (8) from vehi-

cle.

8.

With assistance, remove six bolts (23), washers (22),

and left A-pillar armor (27) from vehicle.

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

•

Left side armor weighs 70 lb (32 kg) estimated.

•

Left A-pillar armor weighs 40 lb (18 kg) estimated.

1.

With assistance, install left A-pillar armor (27), six washers (22), and bolts (23) on vehicle.

2.

With assistance, install left side armor (8), bushing (26), bushing (25), and seat belt bolt (24) on vehicle.