TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 106 of 380

TB 9-2320-302-13&P-1

RIGHT SIDE ARMOR REPLACEMENT - CONTINUED

0020 00

0020 00-4

REMOVAL - CONTINUED

WARNING

Use extreme caution when handling heavy

parts. Provide adequate support and use

assistance during procedure. Failure to fol-

low this warning may cause injury or

death to personnel.

NOTE

•

Right side armor weighs 70 lb (32 kg)

estimated.

•

Right A-pillar armor weighs 40 lb (18

kg) estimated.

7.

With assistance, remove seat belt bolt (24), bushing

(26), bushing (25), and right side armor (10) from

vehicle.

8.

With assistance, remove seven bolts (22), washers

(23), and right A-pillar armor (27) from vehicle.

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

•

Right side armor weighs 70 lb (32 kg) estimated.

•

Right A-pillar armor weighs 40 lb (18 kg) estimated.

1.

With assistance, install right A-pillar armor (27), seven washers (23), and bolts (22) on vehicle.

2.

With assistance, install right side armor (10), bushing (26), bushing (25), and seat belt bolt (24) on vehicle.

417-161

27

22

24

25

26

10

23