TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 101 of 380

TB 9-2320-302-13&P-1

FLOOR ARMOR REPLACEMENT - CONTINUED

0019 00

0019 00-9

INSTALLATION - CONTINUED

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

NOTE

Left floor armor weighs 72 lb (33 kg) estimated.

9.

With assistance, install left floor (11) armor on cab.

10.

Install angle bracket (9), eight washers (8), and bolts (7) on center floor armor (10).

11.

Install washer (6) and bolt (5) on center floor armor (10).

12.

Install angle bracket (2), bracket (1), seven washers (4), and bolts (3) on left floor armor (11).

13.

Install left seat base (12) on left floor armor (11).

14.

Install rear armor (WP 0023 00).

15.

If removed, install arctic heater box. For the M915A3P1, M916A3P1, and M917A2P1, refer to TM 9-2320-302-20-2.

For the M915A4P1, refer to TM 9-2320-303-24-1. For the M915A2P1, M916A1P1, M916A2P1, and M917A1P1, refer

to TM 9-2320-363-20-2.