TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 94 of 380
TB 9-2320-302-13&P-1
FLOOR ARMOR REPLACEMENT - CONTINUED
0019 00
0019 00-2
REMOVAL
1.
Remove left seat base (12) from left floor armor (11).
2.
Remove seven bolts (3), washers (4), bracket (1), and angle bracket (2) from left floor armor (11).
3.
Remove bolt (5) and washer (6) from center floor armor (10).
4.
Remove eight bolts (7), washers (8), and angle bracket (9) from center floor armor (10).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Left floor armor weighs 72 lb (33 kg) estimated.
5.
With assistance, remove left floor armor (11) from cab.
Back to Top
