TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 97 of 380
TB 9-2320-302-13&P-1
FLOOR ARMOR REPLACEMENT - CONTINUED
0019 00
0019 00-5
REMOVAL - CONTINUED
10.
Remove three bolts (27), washers (28), and bracket (26) from right floor armor (25).
11.
Remove bolt (29) and washer (30) from center floor armor (10).
12.
Remove six bolts (32), washers (33), and angle bracket (31) from right floor armor (25).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Floor armor weighs 72 lb (33 kg) each estimated.
13.
With assistance, remove center floor armor (10) then
right floor armor (25) from cab.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
Back to Top
