TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 98 of 380
TB 9-2320-302-13&P-1
FLOOR ARMOR REPLACEMENT - CONTINUED
0019 00
0019 00-6
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Floor armor weighs 72 lb (33 kg) each estimated.
1.
With assistance, install right floor armor (25) then cen-
ter floor armor (10) on cab.
2.
Install angle bracket (21), six washers (33), and bolts
(32) on right floor armor (25).
3.
Install washer (30) and bolt (29) on center floor armor
(10).
4.
Install bracket (26), three washers (28), and bolts (27)
on right floor armor (25).
Back to Top
