TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 108 of 380
TB 9-2320-302-13&P-1
RIGHT SIDE ARMOR REPLACEMENT - CONTINUED
0020 00
0020 00-6
INSTALLATION - CONTINUED
6.
Install right rear roof overlap (1), eight washers (3), and bolts (2) on top of right side armor (10).
7.
Install right rear B-pillar (7), eight washers (9), and bolts (8) on right side armor (10).
8.
Install right rear corner (4), two washers (6), and bolts (5) on right rear B-pillar (7).
9.
Install firewall armor (WP 0026 00).
10.
Install right seat. For the M915A3P1, M916A3P1, and M917A2P1, refer to TM 9-2320-302-20-2. For the M915A4P1,
refer to TM 9-2320-303-24-1. For the M915A2P1, M916A1P1, M916A2P1, and M917A1P1, refer to TM 9-2320-363-
20-2.
11.
If removed, Install collision warning system side sensor display. For the M915A3P1, M916A3P1, and M917A2P1, refer
to TM 9-2320-302-20-2. For the M915A4P1, refer to TM 9-2320-303-24. For the M915A2P1, M916A1P1, M916A2P1,
and M917A1P1, refer to TM 9-2320-363-20-2.
12.
Install interior light unit. For the M915A3P1, M916A3P1, and M917A2P1, refer to TM 9-2320-302-20-2. For the
M915A4P1, refer to TM 9-2320-303-24-1. For the M915A2P1, M916A1P1, M916A2P1, and M917A1P1, refer to TM
9-2320-363-20-2.
END OF WORK PACKAGE
Back to Top
