TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006
TB-9-2320-302-13-P-1

  TB-9-2320-302-13-P-1 - Page 131 of 380

TB 9-2320-302-13&P-1
ROOF ARMOR REPLACEMENT - CONTINUED
0024 00
0024 00-5
REMOVAL - CONTINUED
10.
Remove two bolts (33), washers (34), and right rear corner bracket (32) from right rear roof panel (28).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
NOTE
Right roof panel armor weighs 56 lb (26 kg) estimated.
11.
With assistance, remove six bolts (35), washers (36), and right roof overlap (37) from right roof panel (28).
12.
With assistance, remove five bolts (30), washers (31), right backside roof bar (29), and right roof panel (28) from vehi-
cle.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).


Back to Top