TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 138 of 380

TB 9-2320-302-13&P-1

WINDSHIELD BALLISTIC GLASS REPLACEMENT - CONTINUED

0025 00

0025 00-2

REMOVAL

1.

Remove six bolts (1), washers (2), and right A-pillar overlap (3) from right windscreen surround overlap (4).

2.

Remove six bolts (14), washers (15), and left A-pillar overlap (13) from left windscreen surround overlap (16).

3.

Remove eight bolts (9), washers (10), bracket (8), and center windscreen overlap (7) from vehicle.

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

4.

With assistance, remove four bolts (11), washers (12), left corner welding (17), and left windscreen surround overlap

(19).

5.

With assistance, remove four bolts (5), washers (6), right corner welding (18), and right windscreen surround overlap

(4).