TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 140 of 380

TB 9-2320-302-13&P-1

WINDSHIELD BALLISTIC GLASS REPLACEMENT - CONTINUED

0025 00

0025 00-4

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

1.

Install front window sealer plate (21) on center wind-

shield support (22).

2.

Apply primer on areas indicated by dark lines around

windshield (23). Allow primer to dry.

3.

Apply generous bead of sealant on primed area around

windshield (23). Encircle all holes and across ends of

center windshield support (24) with sealant.

4.

Apply primer on mating areas of windshield frames

(25).

417-178

21

22