TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 141 of 380

TB 9-2320-302-13&P-1

WINDSHIELD BALLISTIC GLASS REPLACEMENT - CONTINUED

0025 00

0025 00-5

INSTALLATION - CONTINUED

WARNING

•

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during

procedure. Failure to follow this warning may cause injury or death to personnel.

•

Use caution when handling window glass. Glass can break unexpectedly during removal/installation

procedure. Wear face shield, apron, and gloves. Failure to follow this warning may cause injury to per-

sonnel.

•

For proper threat protection, ballistic glass must be correctly installed onto ballistic glass frame. During

installation, ensure that decal “INSTALL THIS SURFACE TOWARDS THREAT” is located on outside

of cab. Improperly installed windshield ballistic glass will not protect occupants. Failure to follow this

warning may cause injury or death to personnel.

NOTE

Left and right ballistic glass weighs 83 lb (37.5 kg) each estimated.

5.

With assistance, install left ballistic glass (20) and

right ballistic glass (19) on vehicle.

417-177

19

20