TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006
TB-9-2320-302-13-P-1

  TB-9-2320-302-13-P-1 - Page 302 of 380

Installation Manual – P/N 0257550622-00
(Doc No.:
II
113500-1 D)
Freightliner M915 / M916 -
Crew Protection Kit
Page 110 of 125
4.
Install 8” to 9” of protective hose wrap part # 200 to each hose in the area indicated in
Figure 7-3.
The wrap should start just aft of the P-clips.
5.
Install the Cab Support per Step 5.1 in the main installation manual P/N 0257550622-00.
6.
Reconnect the P-clips that were disconnected in Step 1 using the strap support part #508
(see Figure 7-4).
The strap support allows for the adjustment of the spacing between the
upper and lower set of P-clips.
This spacing should be set to minimize the potential for
the hose to wear or rub on the frame or cab components.


Back to Top