TB-9-2320-302-13-P-1
CREW PROTECTION KIT PART 1 OF 3
TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS
NOVEMBER 2006
TB-9-2320-302-13-P-1 - Page 306 of 380
Installation Manual – P/N 0257550622-00
(Doc No.:
II
113500-1 D)
Freightliner M915 / M916 -
Crew Protection Kit
Page 114 of 125
7.3 Installation of the LH Wheel Housing (M915-A2 and M916-A1)
Replace Steps 5.2 and 5.3 in the main installation sequence with this step and Step 7-4.
7.3.1 Parts, Fasteners, Special Tools, and Materials
Parts
(see Figure’s 7-6,7-7,7-8 and 7-9):
Part No.
Alternate
Part No.
Description
Find No. in
Procedure
Quantity
0257970007-00
Wheel Zone Deflector, LH
#007
1
0257970659-00
Support, LH
#659
1
0257970971-00
Arm, WZD Support, LH
#971
1
0257970640-00
113513-1
Spacer, Wheel Zone Deflector
#640
2
0257970643-00
113513-3
Spacer, Wheel Zone Deflector
#643
2
G81900-0012
Wrap, Hose
#0012
.8 ft
Fasteners
(see Figure’s 7-6,7-7 and 7-8)
Find
No.
Description
Size
(P/N in Procedure - last 3 digits)
Quantity
51
Bolt
1/2" x 2-1/2"
2
52
Bolt
1/2" x 3-1/2"
2
22
Bolt
1/2" x 1-3/4"
2
41
Bolt
5/8" x 2-1/2"
6
35
Star-Washer
1/2”
6
42
Star-Washer
5/8"
6
34
Flat-Washer
1/2" x 1" x 1/8"
12
43
Flat-Washer
5/8" x 1-1/4" x 1/8"
6
39
Nut
1/2"
6
40
Nut
5/8"
6
54
Bolt
5/8” x 2-3/4”
8
55
Nut, Shoulder
5/8"
8
Special Tools
:
Description
Vendor/Part-Number
Lifting device capable of lifting
approximately 110 kg (242 lb)
Commercial
7.3.2 Installation Instructions
1.
Remove the left-hand Sling/Lift bracket from the front of the bumper by removing its four
attachment bolts.
2.
Re-attach the Sling/Lift bracket with the #659 part sandwiched between it and the bumper
using four 5/8” x 2-3/4” bolts, the eight existing 5/8” flat washers, and four 5/8 locknuts.
Torque to 230 Nm (170 lb-ft).
Note: Thread-locking compound must be used on these
fasteners (See Figure 7-6).
Back to Top
