TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 313 of 380

Installation Manual – P/N 0257550622-00

(Doc No.:

II

113500-1 D)

Freightliner M915 / M916 -

Crew Protection Kit

Page 121 of 125

7.6 Shift Tower Installation (M916-A1 Only)

This procedure may be performed anytime after Step 5.4 in the installation process.

7.6.1 Parts, Fasteners, Special Tools, and Materials

Parts

(see Figure 7-11):

Part No.

Alternate

Part No.

Description

Find No. in

Procedure

Quantity

113509-1

Adapter, Shift Tower

#509

1

Fasteners

: (see Figure 7-11)

Find No.

(Table 3-5)

Description

Size

Quantity

4

Bolt (these bolts were temporarily used in step 5)

5/16” x 1-1/4”

5

25

Flat Washer

5/16”

5

56

Screw, Button Head Cap

1/4” x 1/2”

8

32

Flat Washer

1/4”

8

Special Tools

:

Description

Vendor/Part-Number

8.6.2 Installation Instructions

1.

Bolt the shift tower adapter #509 to the Center Floor Armor # 815.

2.

Feed the shifter cable up through the modified square hole in the center floor panel and

the adapter plate.

Re-attach the shift cable to the shift tower and bolt the shift tower to the

shift tower adapter part #509 (see Figure 7-11).

Apply thread-locking compound to the

screws.

3.

Feed the transfer case cable up through the hole cut in the center floor panel #815 and

adapter plate #509.

Re-attach the transfer case cable to the transfer case shifter and

fasten the shifter (not shown) to the adapter plate part #509 using the four holes indicated

in Figure 7-11 and four more Screws 56 and Flat washers 32.

Apply thread-locking

compound to the screws.