TB-9-2320-302-13-P-1

CREW PROTECTION KIT PART 1 OF 3

TECHNICAL BULLETIN; OPERATOR’S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

NOVEMBER 2006

TB-9-2320-302-13-P-1 - Page 317 of 380

Installation Manual – P/N 0257550622-00

(Doc No.:

II

113500-1 D)

Freightliner M915 / M916 -

Crew Protection Kit

Page 125 of 125

7.8 Relocate Engine Check Connector (M915-A2 and M916-A1)

This step can be performed after all of the steps the main installation sequence are completed.

7.8.1 Fasteners

Fasteners

: (see Figure 7-13)

Find No.

(Table 3-5)

Description

Size

Quantity

59

Screw

#10 x 3/4”

1

60

Nut, Hex, Self Locking

#10

1

61

Flat Washer

#10

2

8.8.2 Installation Instructions

1) Drill a new 13/64” hole in the diagnostic switch bracket 1” to the left of the existing

mounting hole (See Figure 7-13).

2) Thread the existing fastener through the new hole and mount the bracket through the lower

dash cover to the support brace.

3) Drill a 13/64” hole up through the lower dash cover using the original mounting hole as a

template.

4) Secure in this location with new fasteners provided (See Figure 7-13).