TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 185 of 396

TB 9-2320-302-13&P-2

ROOF ARMOR REPLACEMENT - CONTINUED

0031 00

0031 00-5

INSTALLATION

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

1.

With assistance, install roof frame (12), six washers (35), new lockwashers (34), and nuts (33) on left and right side

brackets (36).

2.

Install two washers (31), bolts (32), washers (30), and nuts (29) on front of cab.

WARNING

For proper threat protection, armor must be installed correctly into the armor frame. During installation,

ensure that the surface marked “STRIKE FACE” is facing outward towards the threat. Exposing the passive

side of the ballistic panel outward makes the armor less effective. Failure to follow this warning may cause

injury or death to personnel.

3.

Install rear roof armor (23), rear roof armor frame

(28), four washers (26), bolts (27), washers (25), and

nuts (24) on rear of cab.

440-049

28

24,25,26,27

23

12