TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 186 of 396

TB 9-2320-302-13&P-2

ROOF ARMOR REPLACEMENT - CONTINUED

0031 00

0031 00-6

INSTALLATION - CONTINUED

WARNING

For proper threat protection, armor must be installed correctly into the armor frame. During installation,

ensure that the surface marked “STRIKE FACE” is facing outward towards the threat. Exposing the passive

side of the ballistic panel outward makes the armor less effective. Failure to follow this warning may cause

injury or death to personnel.

4.

Install two side panel armor (14), side panel frames (19), seatbelt connectors (22), bushings (21), and bolts (20) on left

and right side of the vehicle cab.

5.

Install two brackets (15), four washers (18), new lockwashers (17), and bolts (16) on left and right side panel frames

(19).

440-048

19

20,21,22

12

14

15

16,17,18