TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 187 of 396

TB 9-2320-302-13&P-2

ROOF ARMOR REPLACEMENT - CONTINUED

0031 00

0031 00-7/(0031 00-8 Blank)

INSTALLATION - CONTINUED

WARNING

•

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during

procedure. Failure to follow this warning may cause injury or death to personnel.

•

For proper threat protection, armor must be installed correctly into the armor frame. During installation,

ensure that the surface marked “STRIKE FACE” is facing outward towards the threat. Exposing the

passive side of the ballistic panel outward makes the armor less effective. Failure to follow this warning

may cause injury or death to personnel.

6.

With assistance, install right roof panel (13) on roof frame (12).

7.

With assistance, install left roof panel (7) on roof frame (12).

8.

With assistance, install middle roof panel (2) and two dividers (1) on roof frame (12).

9.

Install rear roof bracket (8), eight washers (11), new lockwashers (10), and nuts (9) on middle roof panel (2).

10.

Install two roof grab straps (6), four washers (5), new lockwashers (4), and nuts (3) on middle roof panel (2).

END OF WORK PACKAGE

440-047

2

1

3,4,5

6

13

12

9,10,11

8

7

6

3,4,5

1