TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 190 of 396
TB 9-2320-302-13&P-2
COWL ARMOR REPLACEMENT - CONTINUED
0032 00
0032 00-2
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
1.
With assistance, remove four bolts (1), washers (3), lockwashers (2), and cowl assembly (4) from vehicle. Discard lock-
washers.
2.
Remove four bolts (10), washers (12), lockwashers (11), and vent panel (9) from cowl armor (4). Discard lockwashers.
3.
Remove four bolts (5), washers (7), lockwashers (6), and two brackets (8) from cowl armor (4). Discard lockwashers.
CLEANING AND INSPECTION
Clean and inspect all parts IAW
General Maintenance Instructions
(WP 0011 00).
440-005
10,11,12
9
8
5,6,7
4
1,2,3
Back to Top
