TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 322 of 396

ArmorWorks

4.

Cut out the drill template on the last page of the manual.

5.

Align the template on the top bar of the rear cab frame as shown and mark the holes.

1.

Remove P/N 110-170034-001. Use a hammer to tap piece out if fit is tight.

2.

Remove the existing top armor panel from the center position of the rear cab armor frame as shown.

Note: Use 2 man lift technique to remove panel

3.

Remove the Velcro straps and webbing and discard.

0040 00-6