TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 85 of 396
TB 9-2320-302-13&P-2
0016 00-1
DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT
0016 00
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic’s (Item 9, WP 0035 00)
Materials/Parts
Rag, Wiping (Item 9, WP 0036 00)
Lockwasher (14)
Personnel Required
Two
References
WP 0011 00
Equipment Conditions
(M915A3P1, M916A3P1, and M917A2P1)
Vehicle parked on level ground (TM 9-2320-302-
10)
Parking/Emergency Brake applied (TM 9-2320-
302-10)
Engine OFF (TM 9-2320-302-10)
Battery Disconnect Switch in OFF position (TM 9-
2320-302-10)
Equipment Conditions - Continued
(M915A4P1)
Vehicle parked on level ground (TM 9-2320-303-
10)
Parking/Emergency Brake applied (TM 9-2320-
303-10)
Engine OFF (TM 9-2320-303-10)
Battery Disconnect Switch in OFF position (TM 9-
2320-303-10)
(M915A2P1, M916A1P1, M916A2P1, and
M917A1P1)
Vehicle parked on level ground (TM 9-2320-363-
10)
Parking/Emergency Brake applied (TM 9-2320-
363-10)
Engine OFF (TM 9-2320-363-10)
If equipped, Battery Disconnect Switch in OFF
position (TM 9-2320-363-10), otherwise, discon-
nect Battery Cables (TM 9-2320-363-20-2)
NOTE
The following procedure is for right side door ballistic glass and frame. Use same procedure for left side
door ballistic glass and frame.
Back to Top
