TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 92 of 396
TB 9-2320-302-13&P-2
UNDERBODY MINE BLAST PANEL REPLACEMENT - CONTINUED
0017 00
0017 00-4
REMOVAL - CONTINUED
3.
Pull shift cable (10) through center underbody mine blast panel (9).
4.
Place two 6 ft long 2 in. x 4 in. supports across truck frame (11), under cab.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
5.
With assistance, remove eight nuts (6), lockwashers (7), washers (8) and center underbody mine blast panel (9), using 2
in. x 4 in. supports as a guide. Discard lockwashers.
6.
Remove two 6 ft long 2 in. x 4 in. supports.
440-016
6,7,8
9
10
11
Back to Top
